Savo Pool pH- Reduces pH Value, 1.2 kg

Savo pH- is designed to lower the pH value of pool water. The ideal pH range for pool water should be between 7.1 and 7.5. Use the product if the pH value is above this range. Maintaining the correct pH range ensures the proper functioning of chlorine pool chemistry.

Recommended dilution:
The dosage depends on the initial pH and overall chemical composition of the water. Using Savo pH- in the amount of 10 g/m3 of water will lower the pH by approximately 0.1-0.2. Dissolve the product in a container with water and then apply it to the pool. Keep the filtration system running and after sufficient mixing in the entire volume of the pool, measure the pH and repeat the application if necessary. Use protective gloves and goggles. Always dose the product into prepared water and not vice versa. Never mix with other products. Always store in a closed container in a dry place protected from direct sunlight at temperatures between 5 – 25°C and out of reach of children. When working with the product, do not smoke, eat, or drink.

Product safety warnings (H-statements)

• H318: Causes serious eye damage.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P305+P351+P338+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
• P501: Dispose of contents/container in accordance with local regulations.