
Latex emulsion paint for walls and ceilings in interiors. It is characterized by excellent coverage properties, durability, and resistance to repeated washing with water and detergent. It is primarily recommended for use as a base layer under decorative effects of the Primacol Decorative system: Silver Sand, Royal Silk, Mystic.
Drying time to the touch:
depending on the temperature about 1-2 hours, another layer after 3 hours. Tools: brush, roller. Clean tools with water after use.
Thinner:
water
Coverage:
up to 14 m2/liter (1 layer)
Substrate preparation:
The paint is intended for painting surfaces made of mineral and plaster plasters, drywall, bricks, wooden surfaces, wood-based surfaces, and fiberglass wallpapers. The substrate to be painted must be stable, clean, dry, and compact. Fresh plasters can be painted after 4 weeks of drying. Repair and level any irregularities and cracks using filler.
Coating:
Use products from the same batch for painting all surfaces. Stir the paint thoroughly before use. Perform the coating at a temperature of 10-30 °C. Apply 1-2 layers with a time interval of about 3 hours. Paint the ceiling starting from the side near the window and continue towards the center of the room, in accordance with the direction of the light. Start painting walls from hard-to-reach areas and corners using a brush or a small thin roller. Load a large amount of paint onto the roller and then carefully and evenly spread it over the substrate. It is important not to paint with a dry roller. When painting one area, do not take breaks or make corrections on the semi-dry coating. Join the next painted areas using the “wet on wet” technique. Always finish painting each part of the painted area with a roller movement in the same direction. Always paint the entire surface. After finishing work, ventilate the room until the smell dissipates.
Store in a tightly sealed original container at a temperature of 5-25 °C, in a dry place. Do not expose to sunlight. Keep out of reach of children. In case of ingestion, seek medical attention immediately – show the packaging or label. Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one. May cause allergic reaction.
Warning! The color shown on the packaging may differ from the actual color due to printing possibilities and cannot be grounds for complaints. For an accurate determination of color, request a sample with actual coatings from the seller. Test the color on a test surface before application.
| Color: | Shades of green |
| Species: | ostatní |