Primacol Decorative Wax for Gloss and Impregnation, 600 g

The glossy wax is made on the basis of acrylic dispersion with the addition of a wax emulsion and additives. The use of wax allows for a glossy surface that is resistant to moisture and washing, enhancing the color of the surface. It is intended for use on surfaces with noble decorative materials such as stucco, decorative concrete, and plasters. By polishing, a mirror effect can be achieved. It allows for active breathing of the walls. The wax may slightly darken the shade of the coating.

Characteristics of Primacol Decorative Wax for Gloss and Impregnation:

Application method:

stucco – Japanese trowel, Venetian trowel; decorative concrete/decorative plasters – painter's roller

Yield per packaging for 1 layer:

stucco – 24 m2, concrete – 6 m2

Diluent:

Do not dilute, clean tools with water and detergent.

Usage of Primacol Decorative:

Before use, mix thoroughly. Before starting work on the target surface, it is necessary to conduct a test on an inconspicuous area to determine the final effect.

On stucco: It is recommended to cover the surface with wax no earlier than 12 hours after applying the last layer of stucco. Apply a very thin layer of wax using a Venetian trowel or Japanese trowel while simultaneously removing excess wax. Repeat the application 3-4 times at 1-hour intervals. Frequently wash tools with water during application. After the wax has dried completely (within a maximum of 12 hours), the surface must be polished, preferably using an electric polisher with felt.

On decorative concrete and other decorative plasters: Using a painter's roller, apply a thin layer of wax and rub with a sponge until streaks disappear. At once, wax an area of approximately 1 m2, wipe off excess, and continue to the next area. For larger areas, it is recommended to carry out the application in pairs – one applies the wax, the other removes the excess by wiping with a sponge.

Substrate preparation:

The substrate must be dry, free of dust, grease, wax, and other impurities. It is necessary to remove residues of paints, plasters, and other non-adhering layers from the substrate.

Storage:

Keep in a well-closed original container at a temperature of 5-30 °C. Keep out of reach of children.

Safety:

The product is non-flammable. It is not classified as hazardous. During and after work, ventilate the room until the odor is removed. Keep out of reach of children. Individual information is provided in the product data sheet.