Detecha Superfest basic and top coat for metal, red-brown, 5 kg

Basic and top anti-corrosion synthetic paint with a high solid content designed for the surface treatment of metallic materials and for their effective protection against corrosion. The coating has a high barrier effect, making it suitable for use in demanding climatic conditions. It prevents corrosion and reliably acts against all weather influences including UV radiation. The coating is tough, flexible, and water-resistant. For long-term protection (up to 10 years), 2 layers of Superfest are sufficient without a prior primer.

Properties of the metal paint:

• Basic and top coat for metal
• Alkyd paint 2 in 1
• Acts as a high-quality anti-corrosion base and simultaneously as a top protective coating with a high barrier effect.
• The paint film is durable and flexible with a long lifetime.
• Contains an effective corrosion inhibitor including a UV rays absorber, which acts against degradation of the coating due to weather conditions.
• SUPERFEST does not require any base or subsequent top coats.

Usage of metal paint:
Basic and top coatings for sheet metal roofs, steel constructions, gutters, fences, and all metallic objects in the exterior. Due to the high content of effective solid particles, this coating is designed for use in demanding climatic conditions. It is recommended to paint fresh galvanized sheet metal after 1 year of exposure to weather conditions or after previous treatment with a suitable agent. It is advisable to mechanically clean and treat corroded substrates.

Consumption:
1 kg for 6 – 8 m² in one layer

Thinner:
S 6006, spraying S 6001

Yield:
Theoretical yield for one layer is 6 – 8 m²/1 kg of paint at the usual dry film thickness of 50 – 75 μm (corresponding wet thickness of 100 – 130 μm). Actual yield depends on the quality of the substrate and method of application. Maximum lifespan of 10 years can be achieved with proper application and a thickness of 150 μm of dry coating.

Preparation of the substrate and method of application:
The surfaces to be painted must be dry, degreased, and free from dirt, rust, and old non-adhering coatings. Pay special attention to proper mixing, especially before first use. High solid content can cause gloss differences if not properly mixed. If necessary, the coating can be slightly diluted (max. 5%) to the required consistency. The coating is applied with a brush, roller, or spraying in at least two layers at a temperature of +5 to +25 °C. Do not work in direct strong sunlight! The interval between individual coats is at least 24 hours. The coat dries to the touch within 4 hours and cures within 48 hours. When painting continuous larger surfaces, it is recommended to use products from the same batch, or mix the contents of individual packages to color-homogenize. Colored and light metals or surfaces difficult to clean (e.g., with rust residues) should be pre-treated with anchoring polyurethane product FEST PRIMER. This will improve the quality and durability of the entire coating system.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P312: If you feel unwell, call a POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with product instructions.