Stavebniny

Base and top synthetic coating for iron. Designed for the application of single-layer outdoor coatings for steel structures, such as masts, bridges, chassis, fences, exposed to direct weather effects.

THINNER S6003 thinner is designed for diluting baking synthetic coatings, such as S2053, unless otherwise explicitly specified.

Special combination of binders. For use on construction sites, during excavation work, in the forestry industry. Extremely fast drying time (about 2-3 min.), excellent covering power, resistance to water and weather conditions.

Quality, fast, and reliable adhesive. You will use it in the workshop, home, garage, or even at the workplace. It bonds most materials such as wood, concrete, metal, stone, etc.

Glazing putty for repairing minor irregularities, dries within 24 hours and is paintable after 14 days. For sealing and securing glass panes into wooden and metal frames.

The thin-layer stain LAZUROL 3v1 is designed for long-term preventive chemical surface protection of wood.

Thin-layer stain LAZUROL 3v1 is designed for long-term preventive chemical surface protection of wood.

Marking spray for professional construction marking for building and engineering works, construction sites, and road construction.

For single-layer outdoor protective coatings of sheet metal roofing, gutters, steel structures, and other metal objects exposed to constant weather influences and sunlight.

Hetcolor, acrylic tinting paint - for tinting facade and interior dispersion and classic coatings or for direct application.

For glossy top coatings of metals, wood and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Glossy universal water-dilutable topcoat for metal, wood, concrete, galvanized surfaces, copper, and drywall. Most common for finishing doors, frames, railings, cladding, garden furniture, metal roofs, etc.

For glossy top coats of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Urethane-acrylate water-based varnish for wood in interiors. The varnish is intended for creating a high-quality and durable surface on all types of wooden floors made of hard and soft wood in interiors.

CERESIT CHEMOPRÉN FOR FLOORS is a high-quality, exceptionally strong contact adhesive containing solvents.

Multifunctional primer and topcoat antirust semi-matte paint. Ideal for coatings on steel materials and oxidized galvanized surfaces such as roofs, metal structures, poles, fences, columns, gates, etc.

Hetcolor, acrylic tinting color - for tinting facade and interior dispersion and traditional coatings or for direct application.

This synthetic paint with a matte appearance brings timeless elegance and restraint to every surface.

Primarily for coatings on school boards and ping pong tables. It can also be used for coating steel, wood, particle board, fiberboard, and similar materials only for indoor use.

Ideal material for filling holes and irregularities in the substrate, work indoors. Plaster binder – calcium sulfate. Plaster for construction, stucco products, plastering compounds.

Synthetic penetrating and impregnation lacquer with insulating effects designed for concrete and absorbent substrates. It has excellent resistance to water and solutions of weak acids and alkalis.

Corner brush suitable for all types of paints. The brush is a mix of natural bristles and hollow synthetic fibers. Corner brushes and flat brushes with long handles are intended for work in hard-to-reach areas.

Two-component putty, easily shapeable, designed for attaching, gluing, filling, restoring, and repairing at home. It works like modeling clay but hardens like steel, even underwater.

CERESIT CS 11 Acryl is an elastic single-component acrylic sealant designed for filling joints and cracks in masonry, plaster, drywall, and for insulation, suitable for use in interior and exterior applications at non-movable places.