PATTEX Repair Epoxy Ultra Quick 1 min two-component epoxy adhesive, 11 ml

Two-component epoxy adhesive with extremely fast curing does not contain volatile solvents and is intended for permanent repairs, bonding, and fixation. The static mixer ensures precise mixing of both components, allowing very quick and easy application.

Properties of the two-component epoxy adhesive:

• universal use
• cures in just 1 minute
• resistant to water, oil, and common solvents
• does not shrink or expand during curing
• after curing, it can be painted, sanded, drilled, and processed mechanically
• easy application with the mixer

Areas of application:

Pattex Repair Epoxy Ultra Quick 1 min is a rapidly curing two-component epoxy adhesive without volatile solvents, universally applicable. It is intended for bonding, repairing, and fixation of almost all materials: wood, metal, glass, ceramics, rubber, leather, stone, cardboard, and most plastics. It is not recommended for bonding PP, PE, and PTFE (Teflon®).

Surface preparation:

The surfaces to be bonded must be dry, clean, and free of grease. If possible, roughen the surfaces before bonding.

Processing:

Remove the protective cap from the packaging. Hold the adhesive syringe so that the nozzle is facing up. Break off the safety cap at the tip of the syringe. Attach and screw on the mixer firmly. When the syringe is squeezed, both components are thoroughly mixed in the mixer. The mixing ratio of components A and B is 1:1. Apply the adhesive to one of the bonded surfaces. Firmly press both bonded surfaces together. Immediately remove excess adhesive with clean alcohol. After application, unscrew the mixer before the adhesive inside cures. Wipe the syringe tip with a cloth. Put on the protective cap. Store the syringe in its original packaging.

Do not overlook:

Residues of adhesive can be removed immediately after use with ethanol or another universal solvent. Once cured, the adhesive can only be removed mechanically. Dispose of any unused contents in accordance with local waste disposal regulations. Small amounts can be added to household waste. Hand empty containers over for recycling. Dispose of large quantities separately. For more information, see the safety data sheet of the product.

First aid:

In case of contact with skin, wash with water and soap, and treat with a restorative cream. If it gets into eyes, rinse under running water for about 15 minutes and seek medical attention. If swallowed, rinse mouth, drink 1-2 glasses of water, and seek medical help. If inhaled, move the affected person out of the contaminated environment and consult a doctor.

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P501: Dispose of contents/container in accordance with product instructions.