Latex emulsion paint for walls and ceilings in interiors. It features excellent covering properties, durability, and resistance to repeated washing with water and detergent. We recommend it especially for use as a primer for decorative effects of the Primacol Decorative system: Silver Sand, Royal Silk, Mystic.
Touch drying time:
depending on temperature approximately 1-2 hours, recoat after 3 hours. Tools: brush, roller. Clean tools with water after use.
Thinner:
water
Yield:
up to 14 m2/liter (1 coat)
Surface preparation:
The paint is intended for coating surfaces made of mineral and plaster renders, drywall, bricks, wooden surfaces, wood-based surfaces, and fiberglass wallpapers. The substrate to be painted must be stable, clean, dry, and compact. Fresh renders can be painted after 4 weeks of drying. Repair and level any irregularities and cracks using a filler.
Coating:
Use products from the same production batch for all surfaces. Before use, thoroughly mix the paint. Apply the paint at a temperature of 10-30°C. Apply 1-2 coats at an interval of approximately 3 hours. Paint the ceiling starting from the side by the window and continue towards the center of the room, in accordance with the direction of light. Start painting the walls from hard-to-reach places and corners using a brush or small thin roller. Load a large amount of paint onto the roller and then carefully and evenly spread it on the substrate. It is important not to use a dry roller. When painting one area, do not take breaks or make corrections on the partially dry paint. Join the next painted areas using the “wet on wet” technique. Always finish painting each section of the painted area with the roller moving in the same direction. Always paint the entire area. After completing the work, ventilate the room until the smell disappears.
Store in a tightly sealed original container at a temperature of 5-25°C, in a dry place. Do not expose to sunlight. Keep out of reach of children. In case of ingestion, seek medical attention immediately – show the container or label. Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one. May cause an allergic reaction.
Warning! The color shown on the packaging may vary from the actual color due to printing possibilities and cannot be a reason for complaint. For accurate color determination, ask the seller for a sample with actual coatings. Test the color on a trial area before painting.