Bisil Thermo heat-resistant paint 700 °C, 0199 black, 3.5 kg

The paint is specially manufactured to protect steel and cast iron surfaces exposed to cyclic thermal stress. It is used for protective coatings of fireplaces, flue pipes, steam pipelines, engines, heat exchangers, solar collectors...

The paint is designed for the final treatment of surfaces of steel and cast iron objects and structures exposed to one-time or cyclic thermal stress. The paint is formulated based on top-notch silicone resin using modern inorganic spinel pigments, which do not degrade even at temperatures around 700 °C.

The paint can be used for the treatment of metal parts of fireplaces, stoves, flue pipes, steam pipelines, engines, heat exchangers, solar collectors. The paint is suitable for coatings or spraying on structures that are subjected to temperatures up to 700 °C short-term, and up to 550 °C long-term.

Application procedure:
1,) The paint is applied with a brush, roller, spraying, or dipping. It is preferable to paint the first layer. Maintain a minimum time gap of 4 hours between individual layers under normal conditions.
2.) It is optimal to let each layer dry and cure at a temperature of 230 °C for 30 minutes.
3.) The coating system does not need to be cured, but it is softer and does not withstand the action of organic solvents. When subsequently curing the entire coating system, ensure a gradual increase in temperature!!! The most suitable preparation of both steel and cast iron substrate is blasting.

Substrate:
Remove rust and old degraded coatings and degrease the substrate! Optimal degreasing of the substrate... e.g. 2 × coating with a special preparation IZOKOR. This is followed by the actual coating system, usually 2 × CORSIL + at least 2 × BISIL Thermo. For substrate preparation and applying the coating system, we recommend adhering to the principles of technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, ...).

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground/bond container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.
• P242: Use only non-sparking tools.
• P243: Take precautionary measures against static discharge.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see... on the label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use extinguishing agent according to safety data sheet fire extinguisher/sand/carbon dioxide.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container in accordance with product instructions.