SOICRAT penetration concentrate 2802A, 5 kg

Universal penetrating primer for absorbent substrates (plaster, concrete, wood, etc.) to reduce absorbency and improve the adhesion of the top coat with dispersion paint (Latex, Bakrylex enamel, Barlet acrylic, Bakrylex varnish). It also improves the properties of mortars and concretes.

Soicrat construction penetration is used to enhance the properties of all building mixtures that contain cement or lime hydrate or, when diluted with water, as a penetrating coating.

Properties of penetration 2802A:

• concentrate dilution 1:15
• suitable for construction mixtures
• strengthening the substrate
• uniformity of material absorbency
• improvement of mortar and concrete properties
• packaging 5 kg

Technical properties of concentrated penetration 2802A:

• one part of SOICRAT can be diluted with 3 to 15 parts of water (the more absorbent the substrate, the more we dilute)
• concentrate dilution 1:15
• yield depending on the absorbency of the substrate and dilution 5 to 20 m2/kg
• method of application According to the method of use.
• substrate plaster, screeds, concretes, self-leveling compounds, and other substrates
• environment interior, exterior
• shade milky colored liquid

Examples of working procedures for concentrate penetration 2802A:

1. Pening of absorbent substrates:
   One part of SOICRAT is diluted with 3 to 15 parts of water (the more absorbent the substrate, the more we dilute).
   
2. Coating sealing concrete – dust-free treatment:
   To one volume part of Soicrat, we add 10 parts of water and up to 4 to 5 volume parts of cement. After mixing, we use the mixture to coat the penetrated surface according to the previous paragraph.
   
3. Preparation of mortar for tiles and coverings:
   We mix dry 2 parts of sand and 1 part of Portland cement. While mixing, we add SOICRAT diluted with 1 to 2 parts of water until the required consistency is achieved. Do not soak the substrate or the glued tiles!
   
4. Preparation of polymer-lime mortar:
   The base is sand and lime hydrate. For 100 kg of hydrate, we add 10 liters of SOICRAT and mix with water to the required consistency. The mortar has increased adhesion to the substrate, is flexible and suitable for masonry as well as for underlayment of roofing materials.
   
5. Improving the properties of concrete or cement mortar:
   For 100 kg of cement, we add 4 to 10 liters of SOICRAT. After mixing the dry concrete mixture, we first add the dispersion and then water.

Handling the construction penetration 2802A:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, feed, drinking water, nor for coatings of children's toys and children's furniture. The product is treated with a biocide.

Shelf life of concentrated penetration:

The product retains its utility properties for 5 years from the production date in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of packaging and waste from penetration coating:

Dispose of packaging with residual product at the designated location by the municipality for the collection of other waste. See also section 13 of the product safety data sheet.

Safety warnings of the product (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.