SOICRAT penetration concentrate 2802A, 1 kg

Versatile penetrating coating designed for absorbent surfaces (concrete, plaster, wood, etc.), which reduces absorbency and simultaneously enhances the adhesion of topcoats with dispersion paints (Latex, Bakrylex enamel, Barlet acrylic, Bakrylex lacquer). At the same time, it improves the properties of concrete and mortar mixtures.

Construction penetration Soicrat serves to improve the parameters of all construction mixtures containing cement or lime hydrate, or after dilution with water, it can be applied as a penetrating coating.

Properties of penetration 2802A:

• concentrate dilution 1:15
• suitable for construction mixtures
• strengthening of the substrate
• unification of the material's absorbency
• improvement of mortar and concrete properties
• packaging 1 kg

Technical properties of concentrated penetration 2802A:

• one part of SOICRAT can be diluted with 3 to 15 parts of water (the more absorbent the substrate, the more we dilute)
• concentrate dilution 1:15
• yield ranges from 5 to 20 m2/kg depending on dilution and substrate absorbency
• application method According to the method of use.
• intended for plasters, coatings, concretes, self-leveling compounds, and other absorbent substrates
• environment interior, exterior
• shade milky colored liquid

Examples of work procedures for penetration concentrate 2802A:

1. Pentration of absorbent substrates:
   One part of SOICRAT is diluted with 3 to 15 parts of water (the more absorbent the substrate, the more we dilute).
   
2. Coating sealing concrete – dust-free treatment:
   To one volumetric part of Soicrat, we add 10 parts of water and up to 4 to 5 volumetric parts of cement. After mixing, we use the mixture for coating the surface penetrated as per the previous paragraph.
   
3. Preparation of mortar for tiles and slabs:
   Mix 2 parts of sand and 1 part of Portland cement dry. While mixing, add SOICRAT diluted with 1 to 2 parts of water until the required consistency is achieved. Do not moisten the substrate or the tiles being glued!
   
4. Preparation of polymer-lime mortar:
   The base is sand and lime hydrate. For 100 kg of hydrate, add 10 liters of SOICRAT and mix with water to the required consistency. The resulting mortar shows better adhesion to the substrate, excels in flexibility, and is suitable for masonry as well as for bedding roofing materials.
   
5. Improvement of concrete or cement mortar properties:
   For 100 kg of cement, add 4 to 10 liters of SOICRAT. After mixing the dry concrete mixture, first add the dispersion and then water.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.