SOICRAT antifungal penetration V1311S, 5 kg

DISPERZE 2802A SOICRAT antifungal penetration V1311S antifungal penetration is used to strengthen the substrate, unify its absorbency and increase the adhesion of the surface before coatings of internal plasters or facades, gluing tiles and pavings, leveling floors with self-leveling compounds, local repairs of substrate concretes, etc.

Prevents the formation of mold due to active fungicidal components. Due to the small particles, it penetrates deeply. The coloring of the penetration helps to control the scope of the coating with light coloring so that the substrate does not remain unpenetrated. Content of active components: 3-iodo-2-propynyl-N-butylcarbamate (ES 259-627-5) 1.2 g/kg of the product.

SOICRAT antifungal penetration is recommended for reinforcing the substrate, unifying its absorbency and increasing the adhesion of the surface before coatings of internal plasters or facades, gluing tiles and pavings, leveling floors with self-leveling compounds, local repairs of substrate concretes, etc. It prevents the formation of mold due to active fungicidal components.

The coloring of the penetration helps to control the scope of the coating with light coloring so that the substrate does not remain unpenetrated.

Warning: Use biocidal products safely. Always read the label and product information before use.

Properties of dispersion 2802A antifungal penetration:

• antifungal penetration reduces mold formation
• strengthens and unifies the substrate
• reduces the formation of micro-cracks on plasters
• packaging 5 kg

Technical properties of antifungal penetration

• yield 5 - 10 m²/1 kg for one coat
• substrate plaster, smoothing compounds, concrete, self-leveling materials and other substrates
• environment interior, exterior
• content of non-volatile substances 7 - 9%
• bulk density g/cm³ 1.00 – 1.09
• yellow-colored liquid
• treated with biocide

Dilution of the penetrating coating:

• on highly absorbent substrates undiluted
• on absorbent substrates diluted up to 1:0.5 (1 part penetration : 0.5 parts water)
• on non-absorbent and slightly absorbent substrates diluted up to 1:1 (1 part penetration : 1 part water)

Example of the coating procedure for penetration:

The substrate must be dry, free of dust and dirt. Areas affected by mold should be treated with the remedial agent REMAL Sanal on masonry according to the instructions. The product needs to be properly mixed before use. Apply with a brush or roller in one or two layers, depending on the absorbency of the substrate. The top coat can be applied after the drying of the penetration layer in 2 to 4 hours. The optimal temperature for painting is 15 to 25° C.

Handling antifungal penetration:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, feed, drinking water, or for coatings of children's toys and furniture. The product is treated with biocide.

Storage of antifungal penetration:

The product retains its useful properties for 5 years from the date of manufacture in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of packaging and waste of antifungal penetration:

Dispose of containers with remnants of the product at a location designated by the municipality for the collection of other waste. Further, see section 13 of the product safety data sheet.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.