Stavebniny

Primer and top coat synthetic paint for iron. Designed for single-layer outdoor coatings of steel structures, e.g., masts, bridges, chassis, fences, exposed to direct weather conditions.

TANGIT PVC-U is a reliable adhesive for both pressure and wastewater PVC pipes, ensuring strong and tight joints according to European standards.

Spokar holder for sanding mesh measuring 225 × 80 mm in white color.

This repair tape with high adhesion to a wide range of materials is designed for extreme conditions.

For top glossy coatings of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

100% natural bristle, suitable for all types of low and medium viscosity coatings. Flat paint brush with an uncoated wooden handle and clean bristles.

For glossy topcoats of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

For glossy topcoats on metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Multifunctional base and top coat anti-corrosive satin paint. Ideal for coatings of steel materials and oxidized galvanized surfaces such as roofs, metal constructions, poles, fences, columns, gates, etc.

For concrete. 100% water-resistant, resistant to oils, salt solutions, weak acids and alkalis, short-term to diesel fuel. Mechanically durable. Tolerates permanent thermal load up to +50 °C.

Plastic handle, hollow conical synthetic fibers with finely split ends. Universal use.

The paint is intended for priming light colored metals and iron. It is also suitable for coating steel under nitrocellulose and synthetic varnishes drying in the air.

Supermal glazes highlight the natural beauty of wood while protecting it.

Grit 180. Grain - artificial alumina, for hand sanding of wood and metals. Quality sanding paper for hand sanding both dry and wet.

Eternal mat, silk-matt, highly resistant paint for coatings of construction elements and structures made of galvanized sheet metal even without prior oxidation, metal, non-walkable concrete and wood, aluminum, copper.

For glossy topcoats of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Dispersion, velvet matte, whiteness 94%. Paint with optically enhanced whiteness, opacity, and high vapor permeability. It is used for painting plasters, concrete, plasterboards, Cetris boards, particle board, and renovation plasters in interiors. It is made from a...

Eternal mat, silk-matte, highly durable color for coatings of construction elements and structures made of galvanized sheet metal even without prior oxidation, metal, non-walkable concrete, and wood, aluminum, copper.

Grit 40. Grit - artificial corundum, for hand sanding wood and metals. Quality sandpaper for hand sanding both dry and wet.

Hetcolor, acrylic tinting paint - for tinting facade and interior dispersions as well as traditional coatings or for direct application.

For indoor use up to 60 °C, maximum application time 24 hours.

For indoor wall and ceiling coatings, excellent covering power and spreadability, matte finish, resistance to abrasion when dry, outstanding vapor permeability.

Eternal mat, silk-matt, highly durable paint for coatings of construction elements and structures made of galvanized sheet metal and without prior oxidation, metal, non-walkable concrete and wood, aluminum, copper.

For interior coatings of walls and ceilings, significant covering ability and spreadability, matte appearance, resistance to dry abrasion, excellent vapor permeability.