Dupli-Color Alkyton Gloss, self-priming rust color, Ral 8011 hazelnut brown, 1 l

Alkyton glossy is a high-quality alkyd paint with excellent resistance, flexibility, abrasion resistance, and quick drying (even at temperatures down to +5 °C). However, the main advantage is its high anti-corrosive ability and the possibility of painting on already rusted and heavily rusted metal. ALKYTON glossy covers in 1 layer in all shades. Effective anti-corrosive pigments create long-lasting anti-corrosive protection. The product has very good adhesion even on corroded surfaces after manual cleaning. The solvents used give the product excellent flowability – when applied with a brush, it can achieve a finish of similar quality to spraying. The modification of alkyd resins with urethanes provides the product with long-lasting color stability and significantly extends gloss.

Recommended use:
ALKYTON is primarily designed for coatings of new and corroded iron metals in exteriors. ALKYTON can be applied directly to metal in environments with mild industrial pollution, or using a system with RUST-OLEUM primers on metal structures exposed to more aggressive industrial environments. Increased anti-corrosive protection can be achieved in a system with a quick-drying anti-corrosive primer PRIMER +. Where the surface cannot be well cleaned, use the anti-corrosive primer PENETRATOR. New and oxidized galvanized sheet, stainless steel, light metals, and titanium zinc require pre-treatment with the primer GALVINOL. Due to its extreme flexibility and resistance to external influences, ALKYTON can also be applied to seasoned wood treated with a primer in exteriors. ALKYTON can also be used for painting concrete. However, it is not intended for painting concrete floors. ALKYTON is not certified for painting children's toys and for contact with food. ALKYTON is not intended for continuous immersion.

Application:
ALKYTON can be applied with a brush, roller, or spraying.

Drying:

• Drying at 20 °C and 50% humidity
• to the touch - 2 hours
• to touch - 4 hours
• repaintable - 16 hours
• fully cured - 7 days

Diluent:
max 10% Synthetic thinner S6005

Theoretical coverage:
10.5 m²/l at 50µm dry film, depending on the shade.

Surface preparation:
Remove oil, grease, and any other surface contamination with an alkaline preparation RO ND 14 or pressure (steam) cleaning combined with suitable detergents. Remove scales, loose rust, and poorly adhering remnants of old paints with a scraper and steel brush to grade St 2/3 (ISO 8501-1: 1988) or blast to grade Sa 2 1/2. Roughen old, well-adhered coatings to ensure good adhesion and check compatibility with RUST-OLEUM coatings. The surface must be dry and clean before and during application.

Instructions for use:
Thoroughly mix the paint before use. If possible, do not dilute / dilution may be necessary if performing application at low temperatures/. High dilution reduces the solids content and thus the thickness of the coating film. Dilution can affect drying times. In environments C1 – C2, it is typically applied on a suitable primer in one layer. In environments C3-C4, it is usually necessary to apply 2 layers of the primer and one layer of Alkyton in the case of steel and 2 layers of Alkyton in the case of galvanized surfaces.