ETERNAL MAT REVITAL gray-beige RAL1019 0.7 KG

ETERNAL mat Revital is a universal satin matte water-dilutable coating material for indoor and outdoor use, made from a special crosslinkable dispersion of acrylic copolymers, pigments, fillers, and additives. It forms relatively hard, elastic matte coatings with high weather resistance and excellent block resistance, even at elevated temperatures. It features very good opacity, good flow, rapid drying, and excellent adhesion to old synthetic and oil-based coatings. ETERNAL mat Revital meets the conditions of ČSN EN 71 part 3 Safety of toys Migration of certain elements.

Area of application:
ETERNAL mat Revital is intended for indoor and outdoor coatings of wood, fiberboard, particle board, cement-bonded particle boards, drywall, non-walkable concrete, metal substrates coated with anti-corrosive paint, and certain types of plastics (tough PVC, hard PVC, ABS, polystyrene plastics, Umakart, polyester and epoxy laminates; not intended for PE, PP, PTFE coatings). For plastics of unknown composition, a test coating must be carried out beforehand. It is suitable for painting window frames and sashes, including plastic windows, doors, door frames, central heating bodies, school boards, furniture such as wooden, metal, and plastic chairs, shelves, benches, carpet beaters, playground equipment, etc. ETERNAL mat Revital is suitable for both new and refurbishing coatings.

Application:
ETERNAL mat Revital is applied to a dry, perfectly cleaned, and degreased substrate free of non-adhering particles and residues of non-stick coatings using a brush, roller, pneumatic or high-pressure airless spray, at substrate and ambient temperatures ranging from 8 °C to 30 °C and a relative humidity of max. 75%. Depending on the chosen application technology, the coating material is diluted with water up to a max of 15% by weight. For application using high-pressure airless spraying, ETERNAL mat Revital is not diluted. It is sprayed at a pressure of 160 bar using nozzle no. 311 or larger (verified on VYZA vario equipment). ETERNAL mat Revital is applied in two to three coats depending on the desired thickness, with a time interval of at least 2 hours (20 °C). At lower temperatures and higher relative humidity, the time interval
must be extended. An extension is also necessary for highly absorbent substrates.

Consumption (final coat):

• wood, fiberboard 0.22 – 0.35 kg/m²
• metals 0.20 – 0.25 kg/m²
• concrete, plaster 0.30 – 0.35 kg/m²

Coating steel substrates:
Steel substrates must be thoroughly cleaned of corrosion products, mechanical impurities, residue of old coatings, and degreased (preferably with a solution of ETERNAL degreaser concentrate, or another suitable detergent followed by rinsing with water). The prepared and dried substrate is coated with one to two coats of ETERNAL anticorrosive acrylic paint or ETERNAL for metals with an interval of 4 hours between coats. After the anticorrosive paint has dried, two layers of ETERNAL mat Revital are applied with a time gap of 2 hours between coats.

Coatings of wood, fiberboard, and particle board:
The substrate must be thoroughly cleaned of dust and mechanical impurities, resinous spots must be removed (e.g., by washing with thinner), and the surface treated with FORTEKRYL impregnating agent with protective effects against wood-destroying and wood-staining fungi and wood-destroying insects. In dry interiors, the penetrating agent FORTE penetral can also be used. After drying of the penetration, the surface is sanded with fine sandpaper. Fiberboard and particle board are then coated with one layer of the isolating color ETERNAL In stop to prevent potential color stains from the substrate into the top coat. After the isolating coat dries, the surface is sanded with fine sandpaper. On the prepared substrate, two layers of ETERNAL mat Revital are applied with a time interval of 2 hours between coats.

Coatings for concrete surfaces and plasters:
Mineral substrates must be freed from non-adhering coatings, mechanical impurities, and greasy surfaces must be thoroughly degreased (ETERNAL degreaser). The dry substrate is saturated with FORTE penetral and after it dries, two coats of ETERNAL mat Revital are applied with an interval of 3 hours between coats. For saturating very absorbent substrates (plasters), ETERNAL mat Revital diluted with water in a 1:1 ratio can also be used. Mineral substrates must be sufficiently carbonated.

Coatings for cement-bonded particle boards:
Cement-bonded particle boards must be sufficiently carbonated. The surface of the boards must be thoroughly cleaned of mechanical impurities, non-adhering old coatings, degraded surface layers, and grease. The prepared substrate is thoroughly saturated with the special penetrating material FORTE penetral. It is best to penetrate with one coat until the substrate is saturated. When the dried penetrating agent starts to form a glossy film on the surface, the penetration is completed. After a minimum of six hours from penetration, two coats of ETERNAL mat Revital are applied with a technological break of 4 hours between coats.

Coatings of plastics:
The surface of plastics must be thoroughly cleaned, free of any residues of old non-adhering surface treatments, adhesives, separators, protective films, and degreased (preferably with a solution of ETERNAL degreaser concentrate, or another suitable detergent followed by rinsing with water). Glossy surfaces should ideally be sanded with fine sandpaper (no. 360 or finer). On such a prepared substrate, two coats of ETERNAL mat Revital are applied with a technological break of 4 hours between coats