Eternal for pools, light blue, 5 kg

ETERNAL for pools is intended for coatings of concrete pools and surrounding concrete surfaces, garden ponds, and barrels, or for repair coatings of fiberglass boats. Due to its very good adhesion to anti-corrosive coatings, it is possible to finish surface coatings of metal pools, whose surface is treated with a quality anti-corrosive coating such as SANAKRYL antikor EP.

Area of application:
ETERNAL for pools is intended for the surface treatment of concrete pools and surrounding concrete areas. ETERNAL for pools is also suitable for painting metal pools and barrels, whose surface is treated with a quality anti-corrosive coating such as SANAKRYL antikor EP. It can also be used for coatings of fiberglass pools and boats. It is not intended for coatings of pools and containers made of polypropylene or polyethylene.

Consumption:
0.3 – 0.5 kg/m² (2 layers)

Processing:
ETERNAL for pools is applied in two layers, on a dry, cohesive, and cured concrete substrate, free of all impurities, grease, and residues of coatings, with a break between individual coats of 4 to 24 hours. ETERNAL for pools can be diluted with a maximum of 5–10% water, depending on the method of application. Coatings can be performed in the temperature range of 8 – 30 °C.

Outdoor coatings should not be applied in intense direct sunlight. Water can be filled into the surface-treated pool no earlier than 7 days after the second coat has been applied. New and smooth concrete substrate must be sandblasted or ground before application. A well-prepared concrete substrate must be treated with the penetrating agent FORTE penetral. The minimum drying time for the penetrating agent is 4 hours.

Metal substrates must be pre-treated with a quality anti-corrosive paint, resistant to prolonged exposure to water, such as SANAKRYL antikor EP, before applying the ETERNAL for pools coating.