Stavebniny

CERESIT TS 63 is a professional mounting polyurethane foam with low expansion, designed for precise and effective filling of joints, cavities, and installation of building elements.

Wood stain with UV filter and a blend of oils for protective coatings on soft and hardwood, exposed to weather conditions, as well as for coatings in interiors.

Dentacryl is a resin for technical use in engineering, electrical engineering, laboratories, for artistic activities, and for DIY enthusiasts. The cured material is colorless to slightly yellowish.

Fungicidal, antibacterial, and algicidal liquid additive for the protection of masonry in water-dilutable paint coatings and other mineral construction materials.

For interior painting of walls and ceilings, high covering capability and spreadability, matte finish, resistance to abrasion when dry, excellent vapor permeability.

Easily anchor into concrete, blocks, solid masonry, hollow bricks, natural stone, and lightweight concrete at normal temperatures.

The paint is used as a penetrating and top coat and is intended for coatings on concrete substrates, masonry, and plasters exposed to water, water vapor or high relative humidity.

For protective coatings of all types of wood including tropical woods, exposed to weather conditions as well as for coatings in interiors.

Primer coat for silicone facade paint. A penetrating coat for absorbent plasters to strengthen and improve the adhesion of BARLET silicone paint.

Nitrocellulose varnish designed for matte, hard coatings of wood. It contains substances that absorb UV radiation, therefore the coating does not yellow and the yellowing of the wood underneath the coating is limited.

Ultra-durable non-brittle universal instant adhesive.

Marking spray for professional construction marking for construction and engineering works, construction sites and road construction.

Seals and glues cracks and very movable joints. Polyurethane sealant with a medium modulus and the ability to both seal cracks and very movable joints as well as bond all kinds of materials.

Primer and top coat for iron. Intended for the creation of single-layer outdoor coatings for steel structures such as masts, bridges, chassis, fences, exposed to direct weather influences.

Wood stain with UV filter and a blend of oils for protective coatings for soft and hardwood exposed to weather conditions, as well as for coatings in interiors.

Ceresit CE 40 Aquastatic is a high-quality flexible grout designed for joints from 2 to 8 mm wide.

Quick-drying lacquer to ensure brilliant gloss and durability. This clear lacquer is weather resistant, providing perfect protection against UV radiation and fading of the lacquer.

A penetrating agent with deep effectiveness for strengthening absorbent substrates and increasing the adhesion of subsequently applied dispersion coatings and leveling insulations.

Wood stain with UV filter and a blend of oils for protective coatings of soft and hardwood exposed to weather conditions, as well as for coatings in interiors.

Kerastuk V is intended for external thin-layer plasters on less exposed surfaces with a basic core plaster or on concrete panels.

Special washable dispersion paint for coatings of drywall boards, which can also be used for coatings on plaster, concrete, cetris boards, chipboard, etc. in interiors. Provides excellent coverage, is breathable, washable, and has a high whiteness of 93%.

Transparent adhesive based on MS polymers. It is made for the outdoors. 100% UV resistance and frost resistance allow you to use it both indoors and especially outdoors. Flexibility, strength, and the chameleon effect are its main advantages.

It absorbs paint excellently and releases it easily and evenly. The lateral overhang of the cover allows painting in corners. Very long lifespan. For painting work with all types of paints, especially those with higher viscosity.

The product is exclusively intended for curing the two-component epoxy coating EPOLEX S 2380 FOR FLOORS.