Soudal mounting foam, expanding, tube, 500 ml

Soudal mounting PUR foam one-component expanding mounting foam ready for immediate use via a tube applicator. Made from high-quality raw materials, suitable for professional use as well. It has excellent adhesion to most materials, outstanding filling capabilities, and thermal and acoustic insulation properties. Contains environmentally friendly propellant.

Characteristics of Soudal mounting PUR foam:

• Excellent adhesion to most materials (except PTFE, PE, and PP),
• excellent thermal and acoustic insulation properties,
• very good filling properties,
• excellent mounting properties,
• excellent stability (does not shrink, no later expansion risk).

Uses of Soudal mounting PUR foam:

• Mounting window and door frames,
• filling cavities,
• sealing and filling openings in roof structures,
• creating an acoustic insulation layer,
• mounting and sealing window and door frames,
• bonding insulation materials and roof structures,
• applying an acoustic insulation layer to engine compartments,
• improving thermal insulation properties of cooling systems.

Technical data of Soudal mounting PUR foam:

• Base polyurethane (PUR foam).
• Consistency stable foam mass.
• Curing system moisture, thixotropic.
• Skin formation approx. 8 min. (20 °C/65% r.h.).
• Surface drying speed does not stick after 20-25 min at 20 °C.
• Curing speed layer 3 cm 1.5 hrs (20 °C, 65% r.h.).
• Yield 1000 ml = approx. 45 liters of foam (in free space).
• Foam structure 70-80% closed cells.
• Specific weight 25 kg/m³ (after curing).
• Temperature resistance -40 °C to +90 °C (after curing).
• Color yellowish white.
• Fire resistance class (DIN 4102 part2) B3.
• Insulation factor 33 mW/m.K.
• Shear strength (DIN 53427) >17 N/cm².
• Compressive strength (DIN 53421) >3 N/cm².
• Bending strength (DIN 53423) >7 N/cm².
• Water absorption (DIN 53429) 1% vol.

Application procedure:

Before application, shake the aerosol can thoroughly - at least 30 times. Moisten the substrate with water, preferably using a spray bottle. Fill gaps and joints up to 50% considering the subsequent expansion of the foam. Apply the contents of the can with the valve facing downwards. During application, occasionally shake the foam can again. Apply the foam from the bottom upwards. The space being filled should not exceed 50 to 100mm in thickness for a single layer of fresh foam. If you need to fill larger cavities, work progressively and always re-moisten the individual layers of applied foam with a spray bottle.

Cleaning:

Before curing, foam can be removed with SOUDAL PU Foam Cleaner or acetone. After curing, remove mechanically and with SOUDAL Foam Remover.

Working temperature:

+5 °C to +35 °C (recommended: +20°C to +25°C). In cold conditions, it is advisable to temper the foam contents to at least 15°C before use (e.g., by submerging in warm water).

Product safety warnings (H statements)

• H222: Extremely flammable aerosol.
• H229: Container is under pressure: may burst if heated.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H335: May cause respiratory irritation.
• H351: Suspected of causing cancer.
• H362: May harm breastfeeding infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H413: May cause long-lasting harmful effects to aquatic life.

Safety handling instructions (P statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.