UNIBAL impregnation linseed oil O1000, 9 l

Impregnation coating based on linseed oil, mainly intended for basic wood treatment, is characterized by excellent penetration properties.

CHARACTERISTICS AND USE OF THE PRODUCT:
It is mainly used for basic impregnation of wood, plasters, and other absorbent substrates, under subsequent coatings with oil-based, synthetic, or dispersion paints. It ensures perfect adhesion of upper coatings, thus protecting the substrate from adverse weather effects.

Key properties:

• excellent penetration into wood
• also applicable on other absorbent surfaces (masonry, paper)
• classic oil paint

SUBSTRATE PREPARATION:

Before application, the wooden substrate must be clean, dry, properly sanded, with a moisture content of max. 12% and free from resin residues. Wood species with a higher resin content (pine, larch) must be pre-cleaned from all resin exudates, for example by rinsing with BALTECH C6000 thinner. The thoroughness of wood preparation directly affects the final appearance of the surface treatment and the overall durability of the coating system. Mineral substrates must mature for at least 28 days before application; they must be dry, dust-free, uncontaminated with grease or oils, and insulated against ground moisture.

THINNER: BALTECH S6006

Theoretical coverage: approx. 7 m²/ l for one coat depending on the absorbency of the substrate

APPLICATION PROCEDURE:

Before use, mix the contents thoroughly and thin if necessary. It can be applied with a brush, roller, or by dipping onto the prepared substrate.
Colored wood coating:
  - 1× coat with UNIBAL IMPREGNATION LINSEED OIL O1000. After about 20 minutes, it is necessary to wipe off the excess linseed oil so that no glossy coating remains on the surface.
  - after 48 hours of drying, sand the surface with sandpaper.
  - 1 to 2× coating with the primer UNIBAL LINSEED PAINT O2025.
  - 1 to 2× coating with the top enamel INDUSTROL UNIVERSAL S2013 or LAZUROL WINDOW ENAMEL U2015.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P331: DO NOT induce vomiting.
• P501: Dispose of contents/container according to the instructions on the product.