BARLET acrylic paste plaster ribbed 1.5 mm, 25 kg

They are used for final exterior and interior decorative surface finishes of buildings. They are supplied in a 1.5 mm version.

Properties of acrylic paste plaster:

• Acrylic
• Ribbed plaster
• Grain size 1.5 mm
• Increased protection against mold and algae
• Weather-resistant
• Color stability, decorative appearance

Substrate preparation:

The substrate must be dry, solid, matured, free of dust and old coatings, e.g., plaster or leveling compound of the thermal insulation system. Apply a primer with BARLET PRIMER FOR DECORATIVE PLASTERS colored to the shade of the plaster.

Recommended working procedure:

Before applying, thoroughly mix the plaster without aeration using a slow-speed mixer. You can adjust the consistency of the plaster with a small amount of clean water. Apply the plaster evenly and without interruption with a stainless steel trowel in a layer corresponding to the grain size. After a short drying period, adjust the surface of the plaster to the desired structure with a plastic trowel. At higher temperatures above 25 °C, the plaster dries faster, consider the proper formation of the structure and jointing. At lower temperatures of 5 to 12 °C and high humidity, use plaster marked Z. At temperatures below 5 °C, the plaster cannot be applied. Protect the applied plaster from rain during drying. Cover surrounding areas, as dried plaster residue is difficult to remove. For uniform areas, use a product from the same batch, mix different batches together before use!

The product is treated with a biocide.

Consumption:

• With a grain size of 1.5 mm, consumption is 2.1 - 2.3 kg/m²

Product safety warnings (H-statements)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.