Paints varnishes

Nitrocellulose varnish designed for matte, hard coatings of wood. It contains substances that absorb UV radiation, therefore the coating does not yellow and the yellowing of the wood underneath the coating is limited.

Primer and top coat for iron. Intended for the creation of single-layer outdoor coatings for steel structures such as masts, bridges, chassis, fences, exposed to direct weather influences.

Wood stain with UV filter and a blend of oils for protective coatings for soft and hardwood exposed to weather conditions, as well as for coatings in interiors.

For glossy top coatings of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent opacity, high gloss, very good weather resistance.

For interior coatings of walls and ceilings, strong covering ability and spreadability, matte appearance, resistance to abrasion in dry conditions, excellent vapor permeability.

For indoor wall and ceiling coatings, strong covering ability and spreadability, matte appearance, resistance to abrasion when dry, excellent vapor permeability.

For interior coatings of walls and ceilings, excellent covering ability and spreadability, matte appearance, resistance to dry abrasion, excellent water vapor permeability.

Tixotropic properties mean that the spray can be applied in thick layers without the risk of dripping. For use on bodywork, in workshops, on bus constructions, in the home.

Coating for metal objects and structures in external environments, e.g., as anticorrosive protection for rust-damaged steel mesh, the undersides of car bodies, etc. It fundamentally does not require a primer.

Glossy universal water-based top coat for metal, wood, concrete, galvanized surfaces, copper, and plasterboard. Most common applications include finishing doors, frames, railings, cladding, garden furniture, metal roofs, etc.

Dispersion, velvety matte, whiteness 94%. Paint with optically enhanced whiteness, opacity, and high vapor permeability. It is used for painting plasters, concrete, drywall, cement boards, particle board, and restoration plasters in interiors. It is made from a mix of...

For top glossy coatings of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

The zinc spray from Auto K Racing is a highly effective, metallic, anti-corrosive primer and topcoat based on zinc.

Universal top paint is used for painting wood, metal, car bodies, and certain plastics. It excels in yield, is quick-drying, and does not run after spraying. It is resistant to weather and corrosion.

For concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and bases, short-term to motor diesel. Mechanically resistant. Tolerates permanent thermal load up to +50 °C.

Supermal Amarit is a special coating intended for temporary shading of greenhouses, cloches, and tunnels.

Universal top paint is used for coatings of wood, metal, bodywork, and some plastics. It excels in coverage, dries quickly, and does not run after spraying. It is weather and corrosion resistant.

Universal top paint is used for painting wood, metal, car bodies, and certain plastics. It stands out for its coverage, dries quickly, and does not drip after spraying. It is resistant to weathering and corrosion.

This is a silver powder that comes with the necessary amount of varnish. It is used for painting wooden frames, decorating cones, etc.

For indoor and outdoor painting of building materials such as masonry, wood, particle boards, fiberboards, and paper. It is washable, with high whiteness and good hiding power.

An email with increased resistance to UV radiation, which is intended for waterproof coatings of the walls of water reservoirs, silage pits, and swimming pools, also for the surface treatment of steel structures and eternit roofs.

Tintable paint, dispersion, abrasion-resistant, vapor-permeable, whiteness 86%, white. Highly covering paint recommended for coatings in residential and utility spaces.

Water-dilutable, universal opaque enamel for interior and exterior coatings of wood, chipboard, masonry, paper, metal, etc. It covers excellently and withstands weather conditions.

For internal coatings of walls and ceilings, significant opacity and spreadability, matte appearance, resistance to abrasion when dry, excellent vapor permeability.