Stavebniny

For indoor use as both a primer and top coating for wood and metal. For outdoor use as a primer color. Not intended for coatings that come into direct contact with drinking water, food, feed, or for coatings of children's furniture and toys.

Acrylic-polyurethane varnish for indoor coatings on wooden substrates. Provides hard yet flexible coatings, perfectly glossy or with a silk matte finish. Coatings feature excellent lightfastness and significant resistance to sticking.

For top coatings of asphalt and metal roofs and for outdoor steel structures that have already been treated with asphalt coatings (at least penetration) - tanks, metal roofs, wire fences.

For top glossy coatings of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Wood stain with UV filter and a mixture of oils for protective coatings for soft and hardwood exposed to weather conditions, as well as for coatings in interiors.

Polyurethane wood glue with a short drying time, very high adhesive strength, and water resistance D4 (ČSN EN 204).

Wood stain with UV filter and oil blend for protective coatings on soft and hardwood exposed to weather influences, as well as for indoor coatings.

Hetcolor, acrylic toning color - for toning facade and interior dispersion and traditional coatings or for direct application.

Spokar masking tape up to 60 °C Slightly creped paper, medium tack, for indoor use up to 60°C, maximum adhesion time 24 hours. 30 mm × 50 mm.

Fine filler for filling small unevenness, grooves, and pores. Designed for common substrates including cast iron, aluminum, zinc, and fiberglass.

This is a glue specifically designed for craft and small DIY projects at home with wood, cardboard, paper… for gluing these materials together or in combination with other materials.

Modern impregnation coating with decorative properties. It acts as an effective deep penetrating primer and also as a top protective coating in ten color shades.

It is mainly used for the initial impregnation of wood, plasters, and other absorbent substrates, under subsequent coatings with oil, synthetic, or dispersion paints.

For concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and bases, temporarily to diesel fuel. Mechanically resistant. Withstands permanent thermal loads up to +50 °C.

A single-layer semi-matt paint that combines the properties of a basic anti-corrosion coating, an intermediate layer, and a topcoat.

For concrete. 100% waterproof, resistant to oils, saline solutions, weak acids and bases, short-term to diesel fuel. Mechanically resistant. Withstands constant thermal loads up to +50 °C.

For all types of paints. Plastic handle rotated relative to the brush head for better grip, end of the handle in the form of a spatula.

For basic anti-corrosive coatings of steel for indoor and outdoor environments, especially under synthetic and air-drying coatings, for painting, e.g., sheet metal structures, machines, etc.

Single-component air-drying anti-corrosive and decorative paint for iron metals (steel, iron, cast iron) for use in exterior and interior.

Painting roller, polyacrylic, width 100 mm, for holder 6 mm. Moltopren woven polyacrylic roller, for indoor and outdoor universal use.

Paint suitable for restoring old coatings on furniture, windows, doors, frames, radiators, colored interior accessories, garden structures, benches, playground equipment, school boards.

For interior coatings of walls and ceilings, significant coverage and spreadability, matte appearance, resistance to dry abrasion, excellent vapor permeability.

Washable wall paint with a velvety matte appearance, excellent coverage, and wear resistance. Washable paint for painting walls and ceilings indoors on stucco, drywall, and other substrates.

Acrylic paste filler for repairing cracks, grooves, and defects in wooden materials. Sandable, water-soluble filler designed for repairing cracks, grooves, and defects in wooden materials.