Hostagrund 2v1 S2160 base and top coat for metal, 0280 rosewood, 4 l

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a base and top coat synthetic paint for iron. Designed for the construction of single-layer outdoor coatings for steel structures, e.g., masts, bridges, chassis, fences, exposed to direct weather influences. It is also suitable for coatings on lightweight metals, e.g., galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows for application of the paint in very thick layers, with high-pressure spraying up to 300 µm of wet film being applied at once. The paint can also be used for absorbing substrates like wood or masonry. The coating film has a silky matte surface. It is produced in a wide range of shades (for wholesale buyers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• base and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free from grease, loose rust, and dust, mechanically cleaned. First, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical Benzene, BALTECH P6401 Acetone, or where possible warm high-pressure water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering contaminants must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs). Absorbent substrates must first be primed with a suitable primer that ensures even absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

With airless spraying equipment:
Before use, stir the contents thoroughly.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, stir the contents thoroughly. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry coating film is at least 100 µm. If needed, additional coats or applications can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can be applied with a brush only without consideration for aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - red-brown, 0910 - aluminum, 6200 - gas yellow

You may need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Prevent breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Seek medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with local regulations.