Hostagrund Prim 3v1 S2177 basic and top coat for metal, 0280 dark brown, 9 l

Self-priming multifunctional synthetic paint. Basic and top anti-corrosive semi-matt paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matt paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously top coat. It is intended for direct application on metals in both outdoor and indoor environments. The metal paint is ideal for painting steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, poles, fences, columns, gates, etc. The paint for metal can also be used for porous substrates such as wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, air pollution, and water from adhering and affecting the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades and to those who prefer an individual shade, a tint base is available to realize an additional 5,000 shades.

Key features:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE or, where possible, hot pressurized water with detergent). To remove residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, grinding discs).
Pretreatment of the surface of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution) and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g., with a cloth made of artificial fleece on a handle, until a metallic gray foam is created. A thorough rinse with clean water follows. The paint is applied after the sheet has completely dried. Porous substrates must first be soaked with a suitable impregnant that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006 

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly stirred. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without guarantee of aesthetic appearance. These shades are primarily intended for spraying applications.

You may find it useful to have covering material, such as paper masking tape or covering foil, or possibly sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking.
• P261: Avoid breathing dust/fumes/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container according to the instructions on the product.