Stavebniny

Modern impregnating coating with decorative properties. It acts as an effective deep penetrating primer and also as a top protective coat in ten color shades.

The mold remover is a broad-spectrum biocidal agent designed to eliminate biotic infestations of masonry, roofing, wood, and other building surfaces with a long-lasting anti-fungal effect.

High-quality, professional, and universal adhesive based on MS polymers, exhibiting extremely high tensile strength and high final bonding strength.

The paint is primarily intended for decorative coatings of blacksmith products where an attractive 'forged' appearance is required.

For glossy top coatings of metals, wood, and materials such as masonry for outdoor and indoor use. Excellent coverage, high gloss, very good weather resistance.

Eternal mat, silk-matt, highly durable paint for coating building elements and structures made of galvanized sheet metal even without prior oxidation, metal, non-walkable concrete, and wood, aluminum, copper.

Structural paint for creating decorative effects. Surfaces painted with this paint change due to the impact of light using pearlescent reflections, creating a three-dimensional depth effect.

High whiteness 95% (MgO), for coatings of extremely smooth surfaces, universal use for coatings of mineral plasters and plasterboard, excellent vapor permeability, increased abrasion resistance.

Universal top paint is used for coating wood, metal, car bodies, and some plastics. It stands out for its yield, is quick-drying, and does not run after spraying. It is resistant to weather conditions and corrosion.

The Fronton powdered color is used to tint painting colors and other building or mineral materials in interiors and exteriors. The color shades are stable and have a long lifespan.

The flat brush Thinner Profi is especially suitable for solvent-based paints for demanding applications. The brush is made with very high-quality natural bristles.

For single-layer outdoor protective coatings of metal roofing materials, gutters, steel structures, and other metal objects exposed to constant weather conditions and sunlight.

Water-based tinted paint with a pleasant scent in attractive shades.

The matte enamel has a universal application for top coatings of metals and woods exposed to weather conditions as well as for coatings indoors. It features quick drying and excellent flow.

Washable wall paint with a velvety matte appearance, excellent coverage, and abrasion resistance. Washable paint for painting walls and ceilings in interiors on plaster, drywall, and other substrates.

Thin-layer stain LAZUROL 3v1 is designed for long-term preventive chemical surface protection of wood.

The paint is characterized by excellent mechanical properties, high opacity and UV resistance, excellent plasticity, very quick drying, and high gloss.

For protective coatings of wood, both soft and hardwood, especially indoors. The lacquer with wax gives the wood a highly decorative appearance, water-repellent and breathable surface.

Basic and topcoat synthetic coating for iron. Designed for creating single-layer outdoor coatings of steel structures, e.g., masts, bridges, chassis, fences exposed to direct weather effects.

Grit 50. Grain - artificial aluminum oxide, for manual sanding of wood and metal. Quality sandpaper for manual dry and wet sanding.

Email is intended for high-gloss coatings of wood, metals, masonry, certain plastics, etc. The coating can be sanded and polished with paste or polish.

For the treatment of wood infested by wood-destroying insects (woodworm, longhorn, etc.) and for the preventive treatment of wood against wood-destroying insects indoors (roof structures, cladding, stairs, floors, etc.) and outdoors without direct and permanent contact...

Quality CQ masking tape suitable for interiors.

Highly durable asphalt anti-corrosion coating with insulating and damping properties. The coating is thixotropic, permanently elastic, and slightly sticky at higher temperatures. It is resistant to water, weather influences, UV radiation, and the effects of all abrasive materials.