Hostagrund 2v1 S2160 primer and top coat for metal, 0100 white, 4 l

Self-priming anticorrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top synthetic coating for iron. It is intended for creating single-layer outdoor coatings for steel constructions, such as masts, bridges, undercarriages, fences, exposed to direct weather effects. It is also suitable for painting light metals, such as galvanized sheets. The paint has excellent adhesion to steel surfaces and very quick drying even in thick layers. The thixotropic nature allows for applying the paint in very thick layers, with high-pressure spraying being able to apply up to 300 µm of wet film in one go. The paint can also be used for painting absorbent substrates like wood or masonry. The coating film has a silky matte surface. It is produced in a wide range of shades (for bulk buyers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical Benzene, BALTECH P6401 Acetone, or where possible, warm pressurized water containing detergent). To remove any remaining salts, the surface should subsequently be rinsed with clean water. Coarse and well-adhered contaminants must be removed manually or mechanically (by sanding or scraping). Any loose rust can also be removed manually or mechanically (with wire brushes or sanding discs). Absorbent substrates must first be saturated with a suitable primer that ensures even absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adherent coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

Using an airless spray device:
Before use, mix the contents thoroughly.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 paint so that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, mix the contents thoroughly. Mixing breaks the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 paint so that the resulting thickness of the dry coating film is at least 100 µm. If necessary, additional coats can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can only be applied with a brush without claiming aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - reddish brown, 0910 - aluminum, 6200 - gas yellow

You might need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with the instructions on the product.