Lazurol Aqua Ekohost gloss V1305 floor lacquer, 5 kg

LAZUROL AQUA EKOHOST is a high-percentage polyurethane water-based floor lacquer with high resistance, hardness, and an attractive appearance that enhances the grain of the wood. It is used for coatings on wood indoors (furniture, parquet, cork coverings) and for coatings on absorbent materials (fiberboard, plywood). It contains a UV filter. It is manufactured as a clear lacquer in satin and matte finishes. It meets slip resistance requirements.

The lacquer is designed to create a high-quality and durable surface for all types of wooden floors made from hard and soft wood indoors. It can also be used for coating plywood, furniture parts, wooden cladding, cork, etc., or as a topcoat on dispersion paints. It meets slip resistance requirements for dry and wet conditions (ČSN 744507) for floors in all residential and living areas, as well as for parts of buildings used by the public – the mean value of the coefficient of friction must be at least 0.5.

Application layer:
Top transparent lacquer

Application method:
brush, paint rollers, spraying

Chemical classification:  
Water-based,  Polyurethane paints

Work procedure:
Before use, mix the lacquer thoroughly. The ambient temperature during application must be between +15 °C and +25 °C. It can be applied with a brush, roller, or by spraying. The surface of the wood to be lacquered must be free of all dirt, dust, and old non-adhering coatings. Resinous areas must be cleaned with thinner, and the surface carefully sanded using graduated sandpaper P80-100-120-150 (grit adjustments should match the condition, type, and quality of the substrate). After removing dirt caused by sanding, one layer of lacquer diluted with a maximum of 10% water is applied. After 2 hours of drying, the surface should be lightly sanded with sandpaper P220-400. After removing dirt again caused by sanding, two layers of undiluted lacquer are applied with a time interval of 2-8 hours. If the time interval between individual coatings exceeds 8 hours, light sanding with sandpaper P220-400 is recommended.

Coloring:
Color shades are prepared in the TELURMIX system.

Coverage:
8 - 12 m2/kg in one layer

You may find masking material, such as paper masking tape or masking film, or sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapors.
• H302: Harmful if swallowed.
• H312: Harmful in contact with skin.
• H314: Causes severe skin burns and eye damage.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P271: Use only outdoors or in a well-ventilated area.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.