DENAS NA KOV-ZÁKLAD anti-corrosion paint for metal, 0110 gray 2.5 kg

DENAS NA KOV-ZÁKLAD basic anti-corrosion protection for iron, aluminum, copper, galvanized steel. DENAS basic anti-corrosion paint for metal (formerly DENAS ANTIKOR) is a water-based paint for new and renovation coatings with enhanced corrosion protection. The paint is suitable for painting steel, iron, aluminum, and freshly galvanized structures and sheets, metal roofs, their plumbing elements, railings, fences, poles, and other metal products located in both exterior and interior. It is also suitable for fresh copper. It exhibits very fast drying, excellent adhesion on metal substrates, coverage, and workability.

• for interior and exterior
• on adhering rust
• excellent cover
• holds perfectly
• mix and paint
• on metals, fresh galvanization, light metals, gutters, railings

The paint has excellent anti-corrosion properties, adhesion to metal substrates, chemical resistance, and long durability. The paint can also be used on partially corroded surfaces. For the topcoat, we recommend using DENAS UNIVERZÁL.

General composition: a mixture of acrylic dispersions, pigments, fillers, and special additives.

Coverage:
6 - 8 m² / kg for one coat

Previous branding:
Denas Antikor basic anti-corrosion paint for metal

Safety handling instructions:

Prevent release into the environment. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. Dispose of contents/container in accordance with local regulations by handing them over to a person authorized to dispose of waste or at a location designated by the municipality.

Hazard information:

H412 – Harmful to aquatic life, with long-lasting effects.

Safety and hygiene:

Follow personal hygiene principles. In case of skin contact, wash the affected area with water and soap. If in eyes, rinse with water. If swallowed, rinse mouth with water, do not induce vomiting. In case of health issues, seek medical attention.

Waste disposal:

Dispose of paint residues and contaminated packaging as hazardous waste in accordance with applicable regulations. The product retains its useful properties in the original unopened container at least until the date indicated on the lid.

Density:

1.1–1.3 g/cm³ VOC: 0.03 kg/kg; TOC: 0.02 kg/kg ONL: 35–45% vol. Category VŘNH: A/i – single-component coatings with special function. Maximum allowable VOC content: 140 g/l. Max. VOC content in the product in ready-to-use state: 39 g/l.

Product safety warnings (H-statements)

• EUH211: Warning! Hazardous respirable droplets may be created during spraying.
• H412: Harmful to aquatic life, with long-lasting effects.

Safe handling instructions (P-statements)

• P273: Avoid release to the environment.
• P501: Dispose of contents/container according to product instructions.